Solid and Liquid Powder Specific Gravity Meter/Specific Gravity Testing Equipment

• Accuracy: ± 5%
• Maximum Measurement Range: ≤3D
• Density Meter Type: Reflection Density Meter
• Viscometer Type: Rotary
• Density Meter Principle: Archimedes Buoyancy Method
• Test Density: Heavy
• Model NO.: TR-DE-120T
• Viscometer Reproducibility: ±0.2%
• Viscometer Rotor Number: 4
• Viscometer Rotor Speed: 6r/min
• Viscometer Rotor Specifications: 1 Size
• Transport Package: Paper/Wood Box
• Specification: AC 100-240V, 50Hz/60Hz
• Trademark: TRYTE
• Origin: China/Hongkong

Product Description

Solid and Liquid Powder Specific Gravity Meter/Specific Gravity Testing Equipment

Application:
     It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.dye,bleach,leather,glaze,clay suspension.,etc industrial.

Standards:
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.

TR-DE-120T can measure the density of solid and liquid; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified through the top and bottom limitation setting.About the solid mode,function of measuring DIN volume abrasion loss and expansibility of rubber,actual density and apparent density of powder,oil content of oil bearing,density of high density products.etc. adopt the memoryless dynamic measurement method for liquid mode; function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight. Function of displaying concentration,density and baume.

Specifications:

Density resolution: 0.0001 g/cm3

Maximum weight:120g

Minimum weight: 0.001g

Measurement range: 0.0001-99.9999g/cm3

Features:

(1)No need to open and close the lid,simple operation,shorter time measuring,according to the specification of new materials laboratory.

(2)Show the percentage composition of mixed samples for researching and developing new materials.

(3)Automatically judge whether density is qualified or not;prompt alarm.

(4)Function of solution compensation.either liquid or water can be used as medium.

(5)Function of setting actual water temperature,measuring medium density,and water proof medium density.

(6)Function of setting aerostatic buoyancy and the bound of density.

(7)Adopt the completed high-capacity measurement accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.

(8)Density value of samples with the temperature from normal to 100 centigrade can be measured.

(9)Take samples conveniently;50CC or less would be okay.

(10)It is very easy to clean the measurement cup,and can't got the limitation of the size of pycnometer caliber.

(11)Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.

(12)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.

(13)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.

Measurement procedure of solid model:

• Place the sample on the test board to measure the weight in the air,and then press the ENTER button to memory.
• Place the sample into the water to measure the weight,and then press the ENTER button to memory.show the density value.

 

Measurement procedure of liquid model:

• Place breaker with samples on testing board.and take off the weigh of pothook.
• Make standard weigh hanged on the pothook and submerged in the liquid to be test totally.and then press the ENTER button to memory.Density valuve can be displayed.

 

Measurement procedure of hydroscopicity products(porosity products)

• Place the sample on the testing board to measure the weight in air,and then press the ENTER button to memory.
• Place the sample that did the waterproof treatment into water to measure the weight in water,and then press the ENTER button to memory.show the density value.

Specification:

Brand		TRYTE
Model		TR-DE-120T
Density Resolution		0.0001 g/cm3
Weight Range		0.001~120g
Density range		0.0001-99.9999g/cm3
Solid   Mode	Measuring solid items	Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of hydroscopicity,non-absorbency,high - viscosity)
	Measuring mode	Archimedes principle A.general solid measuring method B.porosity materials saturation mode C.porosity materials surface covering method mode. D.professional constant volume mode method E.professional rubber abrasion loss and expansibility mode method F.professional hydroscopicity mode method G.professional oil length mode method
	Measurable project	density of general non-absorbency solid density of porosity materials oil length of oil bearing porosity of porosity materials DIN volume abrasion loss of rubber powder density water absorption rate
	Measuring time	About 5 seconds
	Memory method	memory in shorter time by one procedure
	Specific gravity measurement frame	unicase injection forming professional specific gravity mesaturement frame (size:length13.5mm×wide5mm×high11.6mm)
	Measurement tank	unicase injection forming transparent professional measurement tank (size:length16.9mm×wide9.8mm×high8.3mm)
	Result disply	Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on.
	Funtion setting	Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, Loss value setting of fixed weight of reference glue,loss value setting of weight of reference glue,density setting of reference glue.
	Mixed material percentage	Function introduction	automatically read the percentage of the main material in the two kinds of mixed materials
		setting	freely set the density value of main material and subordinate material
		disply	density value,percentage of main material
Liquid Mode	Measurement type	a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on.   b:alcohol,scaling powder,essence,blood,sodium chloride,glycerol,electrolyte,diesel,refrigerating,hydrofluoric acid,dichloromethane,vitriol
	Measurement principle	Archimedes principle displacement method
	Measurement mode	3 group
	Measurement time	about 5 seconds
	Memory mode	memory in shorter time by one procedure
	Result disply	Density and baume
	Specific Gravity Measurement frame	stainless steel specific gravity measurement frame
	Function setting	Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water
	Measurement testing	distilled testing
Calibration mode		auto correction with one button,auto detection.
Output mode		standard interface of RS-232,output and Print testing data conveniently
Standard accessories		Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly
Optional accessories		DE-40 printer,DE-20B anti corrosive liquid measurement assembly
Power		AC100V - 240V
Main feature		data display,accuracy,speediness,convenience Durable,economy

Packing:



Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.


Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;