Computer System Particle Filtration Efficiency Tester (European Standard) -Air Filter Materials Testing Machine-Medical Masks Tester- (PFE)

• Customization: Available
• Max Diameter of Workpiece: 0.2μm
• Mass Scope of Workpiece: 0.1μm
• Model NO.: TRY-M602
• Type: Material Testing Machine
• Maxcapacity: >1000KN
• Accuracy Grade: <1.6
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: Top
• Operating Range of Measures Penetration: 0.0001%-99.9999%
• Measure Accuracy: 0.0001
• Detection Technique: Light-Scattering Photometer
• Concentration Measurement Range: 1.0μ G / M3 ~ 200mg / M3
• Flow Range: 10 ~ 110 L / Min
• Efficiency Measurement Range: 0 ~ 99.999%
• Compressed Air Source: 80 Psig, 7 Scfm (550 Kpa, 198 Std. L/Min)
• Dimensions (L x W x H): 110X 70 X140 Cm
• Transport Package: Wooden Case
• Specification: 110 cm × 70 cm × 140 cm
• Origin: China
• HS Code: 9013809000
• Production Capacity: 100PCS/Month

Product Description

Computer System Particle Filtration Efficiency Tester (European Standard)-Air Filter Materials Testing Machine-Medical Masks Tester-(PFE)

Standard Reference

1 GB2626-2006 "Respiratory protective equipment self-priming filter anti-particulate respirator"

2. EN149-2001+A1-2001 "Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking"

3.NIOSH-42 CFR Part 84 Respiratory Protective Devices

4. ASTM F2100

5. YY0469-2011 "Medical surgical mask"

6. "European Standard EN1822-3: 2009 Single Sheet Filter Test"

The test bench uses a polydisperse experimental aerosol (DEHS or NaCl) to quantify the dust. Under the action of a clean air flow (negative pressure), the conventional performance test is carried out through the sampling of aerosol particles and the pressure difference measurement point of the filter media under test .

The test bench refers to the advanced design concepts of similar international equipment (such as the 8130 model of the US TSI company), but it is also suitable for the test status of related domestic industries. The independently developed program software runs stably and reliably and is easy to operate. Simple operation interface, the operation parameters are clear at a glance. Different dust sources (DEHS and NaCl) can be switched freely. It is suitable for testing a variety of air filter materials(meltblown, glass fiber, PPE, film and other filter materials), medical masks and some labor protection products.

 

Specifications for Respirator Standards
	EN149 EN 13274:7	ISO 16900-3	NOISH:42CFR part 84	GB 2626-2019
Salt Test	NaCl (Sodium Chloride)	NaCl (Sodium Chloride)	NaCl (Sodium Chloride)	NaCl (Sodium Chloride)
Tester Model	TRY-M603	TRY-M603	TRY-M603	TRY-M603
Main parts	Atomizer	Atomizer	Atomizer	Atomizer
	Light scattering photometer	Light scattering photometer	Light scattering photometer	Light scattering photometer OR Laser counter
Test Flow Rate	95L/min	To be recorded in report	85 ± 4 L/min (42.5 ± 2 L/min if used in pairs)	85 ± 4 L/min
Aerosol Concentration	4 to 12 mg/m 3	8 to 35 mg/m 3	≤ 200 mg/m 3	12 to 20 mg/m 3 or  ≤ 200 mg/m 3
Count Median Diameter	0.06 µm	0.06 to 0.1 µm	0.075 ± 0.020 µm	0.075 to 0.26 µm
Geometric Std. Deviation	1.9	≤ 1.4 to 1.8	≤ 1.86	≤ 1.86
Humidity (rH)	60%	<40 % at 23 °C (± 3 °C)	30 ± 10 %	30 ± 10 %

 

Note:Our TRY-M602 EN MODEL is equivalent to TSI 8130A,the results obtained from both testers are comparable.
 

Features

1. Highly consistent test results
2. Complies to more standard than any other filter tester 
3. Reduced cost of ownership with new serviceable photometers
4. Customize fully automated testing sequences
5. New user-interface and data recording options
6. Data print function synchronize
7. Ergonomic design

Main technical parameters

Detection method	dual solid-state photometer
Concentration measurement range	1.0μ g / m3 ~ 200mg / m3
Flow range	15 ~ 100 L / min
Efficiency measurement range	0 ~ 99.999%
Requirements for compressed air source	flow rate 198 L / min at 550 kPa

 

Operating Range of Measures penetration	0.0001%-99.9999%
Measure Accuracy	0.0001
Detection Technique	Light-scattering photometer
Concentration measurement range	1.0μ g / m3 ~ 200mg / m3
Flow range	10 ~ 110 L / min
Efficiency measurement range	0 ~ 99.999%
Compressed air source	80 psig, 7 scfm (550 kPa, 198 std. L/min)
Dimensions (L x W x H)	110 cm × 70 cm ×140 cm (43 in. × 28 in. ×55 in.)
Weight	150 kg (330 lb)

PC Software


Custom Filter Holders


Packing:



Company Information:

      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.


Why choose us?

1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;